Version	Power supply, switch-mode power supply unit, 12 V
Order No.	2580220000
Type	PRO INSTA 30W 12V 2.6A
GTIN (EAN)	4050118590951
Qty.	1 pc(s).

Depth	60 mm
Depth (inches)	2.362 inch
Height	90 mm
Height (inches)	3.543 inch
Width	54 mm
Width (inches)	2.126 inch
Net weight	192 g

Storage temperature	-40 °C...85 °C
Operating temperature	-25 °C...70 °C

RoHS Compliance Status	Compliant with exemption
RoHS Exemption (if applicable/known)	6c, 7a, 7cI
REACH SVHC	Lead 7439-92-1, Lead monoxide 1317-36-8
SCIP	d62541f7-8058-4336-b693-7303c8b40800

AC current consumption	0.5 A @ 230 V AC / 1.0 A @ 100 V AC
AC input voltage range	85...264 V AC (derating at 100 V AC)
Connection system	PUSH IN with actuator
DC current consumption	0.2 A @ 370 V DC / 0.5 A @ 120 V DC
DC input voltage range	95…370 V DC
Frequency range AC	45…65 Hz
Input fuse (internal)	Yes
Inrush current	max. 40 A
Nominal power consumption	35.3 VA
Rated input voltage	110...240 V AC / 120...340 V DC
Recommended back-up fuse	2 A / DI, safety fuse 6 A, Char. B, circuit breaker 2...4 A, Char. C circuit breaker
Wire connection method	PUSH IN with actuator

Capacitive load	unrestricted
Connection system	PUSH IN
Continuous output current @ U_Nominal	2.6 A @ 55 °C, 1.625 A @ 55 °C
Nominal output current for U_nom	2.6 A @ 55 °C
Output current, max.	2.6 A
Output power	30 W
Output voltage, max.	16 V
Output voltage, min.	9 V
Output voltage, note	(adjustable via potentiometer on front)
Ramp-up time	≤ 100 ms
Rated output voltage	12 V DC ± 1 %
Residual ripple, breaking spikes	< 50 mVss @ U_Nenn, Full Load
Wire connection method	PUSH IN with actuator

Degree of efficiency

85 %

Housing version

Plastic, protective insulation

MTBF

According to Standard	Telcordia SR-332
Operating time (hours), min.	896,000 h
Ambient temperature	25 °C
Input voltage	230 V
Output power	30 W
Duty cycle	100 %

According to Standard	Telcordia SR-332
Operating time (hours), min.	417,000 h
Ambient temperature	40 °C
Input voltage	230 V
Output power	30 W
Duty cycle	100 %

Mounting position, installation notice

Horizontal on DIN rail TS 35, top and bottom 50 mm clearance for free air flow, 10 mm clearance to neighbouring active subassemblies with full load, 5 mm with passive neighbouring subassemblies, direct row mounting with 90% rated load

Power loss, idling

0.45 W

Power loss, nominal load

5.29 W

Protection against reverse voltages from the load

18…25 V DC

Protection degree

IP20

Short-circuit protection

Yes, internal

Start-up

≥ -40 °C

Interference immunity test acc. to	EN 61000-4-2 (ESD)\|EN 61000-4-3 and EN 61000-4-8 (fields)\|EN 61000-4-4 (burst)\|EN 61000-4-5 (surge)\|EN 61000-4-6 (conducted)\|EN 61000-4-11 (dips), EN 61000-4-11 (Dips)
Limiting of mains voltage harmonic currents	EN 61000-4-2 (ESD)\|EN 61000-4-3 and EN 61000-4-8 (fields)\|EN 61000-4-4 (burst)\|EN 61000-4-5 (surge)\|EN 61000-4-6 (conducted)\|EN 61000-4-11 (dips), EN 61000-4-11 (Dips)
Noise emission in accordance with EN55032	Class B
Shock resistance IEC 60068-2-27	15 g In all directions
Vibration resistance IEC 60068-2-6	2.3 g

PRO INSTA 30W 12V 2.6A